WRX Trade Eggshell Paint

For best results, all surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied. Remove any loose or flaking material and repair damaged areas. Glossy surfaces should be sanded down to provide a key. Wear a suitable mask if dry sanding. Avoid the inhalation of dust.

Do not apply in damp or humid conditions or room temperatures below +8°C. Stir well before use. It can be thinned up to 10% with clean water if required. Suitable for application by brush, medium pile roller, conventional or airless spray. For best results, load the brush generously. Apply paint evenly and avoid overspreading. Two coats are recommended. Extra coats may be required to cover an existing darker colour.

WRX Trade Max Eggshell will cover up to 15 m² per litre in single coat, depending on the smoothness and absorbency of the surface.

Times may vary. Touch dry in 30 minutes under normal conditions. Allow 4-6 hours between coats. High humidity can extend the drying time.

Remove as much paint as possible from brushes and rollers, before cleaning with warm water or soapy water. Do not empty paint into drains or watercourses. Some local authorities have special facilities for the disposal of waste paint. Replace the lid firmly.

Store and move in cool and dry conditions in a secure upright position. Protect from direct sunlight, frost and extreme temperatures.