WRX TRADE GLOSS

Surface Preparation:

Ensure surfaces are sound, clean, dry, and free of dust and grease

Remove loose or flaking material

Sand glossy surfaces to provide a key

Prime raw wood or MDF with WRX Trade Wood Primer & Undercoat

Prime bare metal surfaces with WRX Trade Antirust Paint

Wait at least 6 hours for the primer to dry before applying the final coat

Application Method:

Stir well before and during use

Apply with a brush, roller, or airless spray

For airless application: Pressure 120-140 bar, Nozzle angle 50°, Nozzle size 0.015”

Thin up to 5% with clean water if required

Clean equipment with warm water and soap

Two coats recommended; additional coats may be needed for darker colours

Coverage: Up to 18 m² per litre, depending on surface conditions

Times may vary. Touch dry in 30 minutes under normal conditions; allow 6 hours between coats.

Remove as much paint as possible from brushes and rollers, before cleaning with warm water or soapy water. Do not empty paint into drains or watercourses. Some local authorities have special facilities for the disposal of waste paint. Replace the lid firmly.

Store in dry conditions, protect from direct sunlight, frost, and extreme temperatures.

Handling: Use in well-ventilated areas; avoid release into the environment.

Precautions:

Keep out of reach of children

Avoid contact with eyes, skin, and clothing

Do not eat, drink, or smoke while using this product

IF ON SKIN: Wash with plenty of soap and water

IF IN EYES: Rinse cautiously with water for several minutes; remove contact lenses if present and easy to do; continue rinsing

Dispose of contents/container through licensed companies

Contains a mixture of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one, which may cause an allergic reaction

Warning! Hazardous respirable droplets may be formed when sprayed; do not breathe spray or mist

VOC Content: Max 33 g/l, low VOC (0.30-7.99%)
Flash Point: Non-flammable